Non ANSI Safety Vests

Non ANSI Safety Vests (also referred as Class 1 Safety Vests) do not meet ANSI/ISEA standards. Non ANSI Safety Vests can be worn were traffic does not exceed 25 mph. These economical safety vests are often warn by parking lot attendants, shopping cart retrievers, warehouse workers and anyone that needs high visibility recognition without meeting ANSI standards.

NON ANSI BEST SELLER

Radwear Non-Ansi Mesh Vest
SKU: RADSVO1
As Low as $2.41

Class 2 Safety Vests

Class 2 Safety Vests meet ANSI 107-2010 (revision to the 107-2004 high visibility standard) which states all workers who are within the public right-of-way of Federal Aid highway must wear ANSI approved class 2 safety vests. These safety vests have a minimum background fabric of 775 sq. inches and a minimum reflective material of 201 sq inches with a minimum width of 35mm. Workers who would typically wear these garments are: railway workers, school crossing guards, parking and toll gate personnel, airport ground crews and law enforcement personnel directing traffic.

CLASS 2 BEST SELLER

Radwear Economy Knit Safety Vest
SKU: RADSV2OS
As Low as $5.03

Class 3 Safety Vests

Class 3 Safety Vests also meet ANSI 107-2010 standards however they provide higher high visibility protection with a minimum background fabric of 1240 sq inches and minimum reflective tape of 310 square inches with a minimum width of 50 mm. Workers who often wear class 3 safety vests are: roadway construction workers, utility workers, survey crews and emergency service personnel.

CLASS 3 BEST SELLER

Radians Safety Vest- C1 3 Surveyor Two Tone
SKU: RADSV63OM
As Low as $15.36

Public Safety Vests

Public Safety Vests meet ANSI 207-2006 standards which require a minimum background material of 450 sq. inches and a minimum reflective material of 201 sq. inches with a minimum width of 2 inches. They are designed shorter to allow quick access to belts and tools. Many of these safety vests feature (but are not mandatory to the standard) loops, pockets, badge holders, mic tabs and ID panels to meet the user's need for functionality while still offering an effective high visibility garment.

Here's where it gets a little complicated. Public Safety Vests do not meet ANSI 107-2010 standards however on Dec 16, 2009 the FHWA approved a revision. Safety Vests complying with ANSI/ISEA 207-2006 will be acceptable as an option to ANSI/ISEA 107-2004 for law enforcement and emergency responders. The revision is effective January 15, 2010 and workers on non-federal highways must be in compliance by December 31, 2009.

PUBLIC SAFETY VEST BEST SELLER

OccuLux EMS Public Safety Vest
SKU: OCCPSE
As Low as $22.16