NSA DWH1100-R Class 00 Red Rubber Voltage Gloves Standards ANSI/ASTM D120, Class 00, Type 1 Compliant to CSA Z462 for Arc Flash (Canada) Compliant to NFPA 70E for Arc Flash Max Use Voltage 500V AC/750V DC

Testing, Dates, Usage:

• Rubber insulating gloves are electrically tested, and marked with the initial test date. • Rubber insulating gloves must be put into use within 12 months of the test date. • Rubber insulating gloves must be tested every 6 months after being put into service. • Leather protectors are not required to be marked with a date.

Cleaning, Storage, Inspection:

• Rubber insulating gloves should be cleaned in warm water with mild soap. A small amount of chlorine bleach can be used to disinfect. • Air dry or tumble dry on low heat. • Store rubber gloves in a glove bag, unfolded, with leather protectors taken off. • Glove bag should be hung in a cool, dry place away from sunlight and ozone. • Rubber glove inspections should occur before each use. • Inspection methods are outlined in ASTM F1236.