Leather Welding Clothing
Our heavy-duty welding leather clothing is made from premium heavy side split cow leather. Chrome tanned to assure softness and durability while resisting heat, sparks, slag and cuts. All seams are double lock stitched and sewn with Kevlar thread. Our entire selection of welding clothing is riveted in all major stress points and snaps are anodized to prevent arc flashback.
Memphis Welding Bib Apron with Split Leg and Front Pocket, 24 in x 42 in - 38242MW
SKU: MCR38242MW
$43.19
Memphis Welding Apparel - Cape Sleeve with Open Back - 2 Pockets 38100MW
SKU: MCR38100MW
As low as $64.79
Memphis Welding Apparel - Welding Jacket, 30 Inch with 3 Pockets 38030MW
SKU: MCR38030MW
As low as $86.39
Memphis Welding Bib Apron with Split Leg and Front Pocket, 24 in x 36 in - 38236MW
SKU: MCR38236MW
$35.63
Spatter Protection - Spatter is caused when the weld metal crosses the arc. Heavy spatter will burn through lightweight clothes, but not leather welding clothing. Most severe burns are caused not by the original arc or flame, but by ignited clothing. Synthetic materials can melt on skin, causing serious damage. It is highly recommended that leather welding clothing such as aprons, sleeves and jackets be utilized to provide maximum protection against spatter, sparks or radiation. Wearing dark colors is also helpful because they reduce the amount of reflected light under the face shield.
REGULATIONS:
According to ANSI Z49.1.88-Welding and Cutting (4.3) appropriate protective clothing for any welding and cutting operation will vary with the size, nature, and location of the work to be performed. Clothing shall provide sufficient coverage and be made of suitable materials to minimize skin burns caused by sparks, spatter, or radiation.
