Pyramex Safety RCMS28SE Series Self Extinguishing Hi-Vis Safety Vests MATERIAL Vest: Hi-Vis solid polyester treated for self extinguishing (120 GMS) Reflective tape: China brand silver BIAS TAPE Matching vest material CLOSURE 3 metal snaps REFLECTIVE STRIPING One 4” contrasting material stripe applied around vest horizontally with 2” China brand silver reflective stripe centered inside contrasting stripe Two 4” contrasting material stripes with 2” silver reflective stripe centered over contrasting stripe run vertically from bottom stripe, over shoulders to make a “X” on the back then connecting to the stripe on the back side of vest POCKETS One 12” x 12” reach thru pocket on back with zipper closures Flashlight pocket on back Two 7.5” x 7.5” outer lower front pockets (left & right side) with metal grommets.Reflective horizontal stripe over pockets. Two 10” x 12” inside lower front pockets (left & right side) with two hook & loop closure tabs Meets CSA Z96-15 and ANSI/ISEA 107 - 2015 / Type R - Class 2 Series WASHING INSTRUCTIONS Max 25 Washes Hand wash, cold or machine wash-gentle cycle Hang dry or machine delicate dry Do NOT iron or dry clean NO bleach or softener 100% polyester Made in China One 7.5” x 7.5” outer mid-waist pocket - divided into five sections Two 6” x 7” outer mid-waist pockets (left & right side) with hook & loop closure One 7.5” x 7.5” outer mid-waist pocket with metal grommet One 5” x 7” upper chest pocket with clear PVC front with flap closure One 5.5” x 6.5” upper gusseted chest pocket with hook & loop closure SPECIAL FEATURES Double tacked 1” x 3.5” badge/mic holder located 3” from the center shoulder seam on both sides Two metal grommets on upper front collar trim D Ring slot: 3” wide with a 1/2” reinforced opening 1” from top of collar