Salisbury AS1000HAT Hard Hat with Face Shield Polyethylene Material Orange Color One Size - 1 / EA

Salisbury AS1000HAT W H Salisbury Hard Cap with Ratchet Suspension, Chin Guard and AS1000 Series Arc Flash Face shield, Orange 10 cal/cm2 ATPV rating when used with the included chin cup 7.5" x 20" viewing area Extra light tint .06" thick Absorbs >99.9% of harmful UV radiation Resistant to fogging Shield meets current ANSI Z87.7 and tested ASTM F2178 specifications AS1000 with SA79R front brim hard hat. Features of Salisbury AS1000HAT Arc Flash Face Shield: ISO 9002 Registered Quality ATPV 10 cal/cm² Arc Rating when used with chin cup .06” Thick 7.5” x 20” Viewing Area Extra Light Tint Anti-Fog Instructions for Assembly: Take ASSLB Bracket with Salisbury Logo facing up on brim of hard hat and insert black clips into side accessory slots of hard hat. (Clips will fit snug into accessory slots.) Turn all pins on bracket horizontally and center Protective Shield (long side on top) over pins. Secure Protective Shield by rotating pins vertically. Attach Chin Cup onto the bottom of Protective Shield and as in step 2, rotate pins vertically. Cleaning & Maintenance: Clean and inspect after use. Clean with a damp cloth unless heavily soiled. Should further cleaning be required, clean with mild, unscented, non-abrasive soap and water, pat dry. Disassemble if required, for cleaning or inspection. Inspect and replace any damaged or worn components. WARNING: Failure to follow these instructions can result in permanent impairment of sight or other serious personal injury.