The MCR Safety ForceFlex FF2932 Cut Resistant Insulated Mechanics Work Gloves were created in the oil and gas fields specifically to provide greater grip in dry, wet, and oily conditions.

FEATURES:

100-gram Thinsulate® Lining

Aqua blue water-resistant polyester back

Cut resistant Hypermax™ liner

Expansion gusset cuff for ease of donning

MCR Safety D3O impact gloves offer on average 20% more impact dissipation than other impact gloves with the same height

MCR Safety D3O impact gloves are on average 29% thinner than other impact level 2 competition

Machine washable, air dry

Patented D3O® TPR back of hand protection

Orange grid pattern reinforced palm has been tailored to provide grip in dry, wet, or oily conditions

Patented D3O® palm padding to help dissipate impact and vibration

Reinforced thumb crotch for strength in a high stress area

Slip on cuff with pull tab and ID panel for personalization

Tan suede synthetic leather palm and fourchettes for greater durability

Waterproof and windproof Hipora bladder

Cuff Style: Slip-on – Open

Cuff Style Material: Nylon

Hemmed: Yes

Finger Style: Standard

Thumb Style: Wing

Seam Construction: Woven

Leather Cut: Suede Synthetic

Insulated: Yes

Primary Polymer Coating: Polyurethane

Grade: Premium

Color: Blue

Sizes: Medium to 2X-Large

1 Each

PERFORMANCE:

ANSI Cut: ANSI Cut Level A5; ANSI/ISEA 105:2016 Standard; ASTM F2992-15 Cut Resistance Test Method

ANSI Impact: ANSI/ISEA 138 Impact Standard; Gloves with the Impact Level 2 rating can transmit up to and including ≤6.5 kN of mean transmitted force to the back of the hand.

ANSI Abrasion: ANSI Abrasion Level 4; ANSI/ISEA 105:2016 Standard; Abrasion Resistance Test Method ASTM D3389-15 for Coated Gloves; Abrasion Resistance Test Method ASTM 3884-09 for Uncoated Gloves

ANSI Puncture: ANSI Puncture Level 5; ANSI/ISEA 105:2016 Standard; Puncture Resistance Test Method EN388

ANSI Contact Heat: Level 3 (For applications less than 392 degrees Fahrenheit. Contact Heat Only, Not Direct Flame.)

ANSI/ISEA 105:2016 Standard, ASTM F1060 - 18 Standard Test Method for Evaluation of Conductive and Compressive Heat Resistance.  Conductive heat ratings measure the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds.

CE Contact Cold: Level 3 Protection (EN511 is a standard for testing and rating cold protective gloves.  Resistance to Contact Cold is based on the thermal resistance of the glove material when exposed to contact with a cold object.   Level 0 offers the least protection while level 4 offers the most protection.)

*WARNING: THIS PRODUCT IS CUT RESISTANT, NOT CUT PROOF. DO NOT USE WITH OR AROUND MOVING EQUIPMENT, TOOLS, OR MATERIAL.