Fall Protection

Introduction

Maintaining fall protection PPE is an important part of jobsite safety, but it's even more so in wet conditions when your margin for error is significantly reduced. Wet conditions introduce slippery surfaces and increase the risk of falls when working at heights. If your job requires you to work at heights in the fall or winter, then it is important that you check your equipment regularly to ensure the wet weather hasn't caused rust or other issues and keeping up on the maintenance saves costs on replacing your PPE.

As an employer, not having a fall protection maintenance program in place could lead to lost productivity and potentially leave you liable for employee injuries. Whether you work at height or manage employees that do so, it's about preserving lives, protecting your business, and ensuring that everyone returns home safely at the end of the day.

How do you maintain your fall protection PPE in wet/icy conditions?

To ensure and protect the safety and performance of your fall protection system. in wet weather conditions or rain, you should follow these safety tips:

Do's:

  • Regular Inspections: Conduct routine inspections of all fall protection equipment, paying special attention to components exposed to the sun exposure and elements. Look for signs of wear, rust, or corrosion, which can compromise gear integrity.

  • Cleaning and Drying: After exposure to rain or wet conditions, it's crucial to clean and thoroughly dry all equipment. Moisture left on harnesses, lanyards, or anchor points can lead to mildew and material degradation over time.

  • Proper Storage: Store fall protection gear to protect it in a dry, climate-controlled environment. Hanging harnesses, gloves, and lanyards allows air circulation to protect them and helps prevent mold growth.

  • Weather-Resistant Gear: Consider investing in fall protection equipment designed for wet conditions, such as products with weather-resistant coatings and materials.

  • Emergency Procedures: Establish clear emergency procedures for employees working in wet conditions, including rescue plans, to save employees and workers' lives in an emergency situation in the event of a fall.

  • Consult Manufacturer Guidelines: Always follow the manufacturer's guidelines for maintenance and taking care of your body-specific fall protection system and safety gear.

Don'ts:

  • Don't Neglect Inspection: Never skip regular inspections of your fall protection equipment, even if it hasn't been used in a while. Damaged or worn-out gear can fail when needed the most.

  • Don't Use Wet Equipment: Avoid using fall protection equipment that is still wet. Moisture can weaken the materials and compromise their integrity. Always ensure your gear is completely dry before use.

  • Don't Store Wet Equipment: Never store wet fall protection equipment in a confined space, like a toolbox or bag. This can trap moisture and promote mold and mildew growth, which can weaken the equipment.

  • Don't Use Harsh Cleaning Agents: Avoid using harsh chemicals or solvents when cleaning your PPE. Stick to mild soap and water to prevent damage to the materials.

  • Don't Modify Equipment: Do not modify or alter your fall protection equipment in any way. This can compromise its safety and effectiveness. Always use it as intended by the manufacturer.

  • Don't Ignore Environmental Factors: Be mindful and aware of the environment where your fall protection equipment is stored or used. Avoid exposing it to excessive heat, direct sunlight, chemicals, or other hazards that can accelerate wear and tear.

Proper Training for Maintaining Fall Protection PPE in Wet Conditions

When it comes to taking care of fall protection personal protective equipment (PPE) in wet conditions, regular training is absolutely essential for ensuring safety. It equips workers with the necessary knowledge and skills to properly evaluate, maintain, and use their gear in wet environments, ultimately helping them reduce risks and avoid accidents.

Hands-on Practice: Training should incorporate practical exercises and hands-on experiences. Workers should have opportunities to use fall protection equipment under the guidance of experienced instructors.

Interactive Learning: Engaging training methods, such as workshops, simulations, and interactive discussions, enhance the learning process and make it more memorable.

Customization: Training should be tailored to the specific needs of the workplace. In the case of fall protection in wet conditions, training should address the unique challenges posed by rain, snow, or wet surfaces.

Certification: Depending on the industry, employees may need to attain certification in fall protection. Regular training sessions help employees meet certification requirements, ensuring they possess the necessary skills and knowledge.

How do you replace your fall protection PPE in wet conditions?

If you need to replace your fall protection PPE in wet or dangerous winter weather conditions, you should consider these risk factors:

  • Choose the right equipment for the job: Select PPE that is suitable for the type of work and environment you are in. For example, in winter, if you work in cold environments with freezing temperatures, you may need PPE that is made of stainless steel or other materials that resist corrosion and freezing. If you work in rainy environments with slippery surfaces, you may need PPE that has a strong and slip-proof grip.

  • Choose the right size and fit for yourself: Make sure that your PPE fits you properly and comfortably. Your harness should be snug but not too tight and allow free movement of your feet and limbs. Your lanyard should be adjusted to the appropriate length for your work area. Your helmet should be secured on your head with a chin strap. Your gloves should be tight enough to prevent water from entering but thin enough to allow you to feel what your feet are doing.

  • Choose the right accessories for yourself: Use accessories that can enhance and protect your safety and comfort in wet weather conditions. For example, if you wear glasses or goggles, use anti-fog spray or wipes on them before going outside. Wear a hood or hat to keep thebrain out of your eyes. Use a cart and take the elevator when carrying large items.

OSHA Standards and Regulations:

OSHA (Occupational Safety and Health Administration) released these specific regulations and standards, 1910.132, related to maintaining personal protective equipment (PPE) for the hazards of dangerous workplace and fall hazards of workers and protection during the job to prevent injuries and fatalities from the hazards of workers and falls during job.

Conclusion:

It's really important to keep your safety gear for working up high in good condition, especially when it's raining. Rain can make things more dangerous, so it's super important to check your gear, clean it, and keep it in good shape. If you do these things, you can make sure that your gear is safe and reduce the chances of accidents happening because of it.

Frequently Asked About Maintaining Fall Protection PPE in Wet Conditions:

Q: What types of fall protection PPE can be affected by snow or cold weather wet conditions?

Fall injury protection PPE that can be affected by rain or wet weather conditions includes harnesses, lanyards, lifelines, connectors, and other components of a fall arrest or harness or fall injury restraint system harness. This equipment is often made of materials like nylon or polyester, which can lose their strength and integrity when wet.

Q: What proper training should be done before using fall protection PPE in wet conditions?

Before using a fall protection system or PPE in wet conditions, inspect it thoroughly for any signs of damage or wear. Ensure that all components and safety itself, including webbing, stitching, and hardware, are in good condition. If any part of clothing, safety harness, or the safety equipment is damaged or shows signs of water damage, it should be taken out of service and replaced.

Q: How often should the fall protection systems and equipment be inspected and replaced in wet conditions?

Fall protection equipment should be inspected before each use, especially outdoor use in wet conditions or rain where it may experience more wear and tear. Additionally, conduct regular inspections as recommended by the manufacturer. Any falls or equipment showing signs of damage, wear, or water damage should be replaced immediately.

Sources:

https://www.envirosafetyproducts.com/blog/rainwear-for-outdoor-workers/#Safety_in_Wet_Conditions

https://www.envirosafetyproducts.com/3m-dbi-sala-fall-protection.html

https://www.osha.gov/laws-regs/regulations/standardnumber/1910/1910.132

https://www.envirosafetyproducts.com/resources.html