3M™ Mercury Vapor/Chlorine/Sulfur Dioxide Gas Cartridge 6009S (1 Pair)

3M 6009S Mercury Vapor/Chlorine or Sulfur Dioxide Gas Cartridge
The 3M 6009S respirator cartridges are NIOSH approved against mercury vapor or chlorine. Can be used with 3M 2000 Series Filters and 3M 7093 Filter (both require 3m 502 Filter Adapter) or 3M 5N11 and 5P71 Filter (both require 3M 501 Filter Retainer). Fits 3M Full and Half Facepiece Respirators. When properly fitted, cartridges and filters help provide protection from most chemical contaminants making it easy to standardize any 3M elastometric facepieces as your brand for respiratory protection.

When properly fitted, helps provide respiratory protection from mercury vapor or chlorine at concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Not for use in environments that are immediately dangerous to life or health (IDLH). Note: The mercury vapor end of service life indicator must be readily visible without manipulation when wearing the respirator. If not readily visible, do not use.

COMPATIBLE 3M HALF AND FULL FACEPIECE RESPIRATORS 6000, 7000 AND FF-400 SERIES
Call our customer service for alternative respirators
(click part number for details)

COMPATIBLE 3M PARTICULATE FILTERS AND GAS/VAPOR CARTRIDGES
(click part number for details)