Product Details
| Manufacturer | 3M |
|---|---|
| Brand | 3M DBI-Sala |
| Family | 3M DBI-Sala |
| 3M ID | 7100228410 |
| UPC | 648250161821 |
| Main Category | Fall Protection |
| Manufacturer Category Level 1 | Personal Protective Equipment |
| Manufacturer Category Level 2 | Fall Protection |
| Manufacturer Category Level 3 | Anchorage Connectors |
| Color | Black |
| Packaging | 1EA |
Description
3M DBI-SALA 2103670 Permanent Roof Anchor with Flashing and Cap
The 3M DBI-SALA 2103670 Permanent Roof Anchor with Flashing and Cap is a permanent roof fall protection anchor designed to provide a secure anchorage point for personal fall arrest systems during work at height. Featuring a roof-mounted anchorage design with integrated flashing and a protective cap, this permanent roof safety anchor supports applications such as roofing, construction, maintenance, and industrial facility inspections while helping protect the roof penetration against weather exposure. Its permanent installation provides a consistent anchorage solution for recurring roof access, helping workers perform elevated tasks with greater confidence and reducing the need to establish temporary anchorage points for routine maintenance.
Product Information
Specifications:
- Brand: 3M DBI-SALA
- Manufacturer Part Number: 2103670
- Product Type: Permanent Roof Anchor
- Product Components: Roof anchor, flashing, and cap
- Primary Function: Permanent anchorage for compatible personal fall protection systems
- Intended Use: Fall protection for workers performing tasks at height on suitable roof structures
- Installation: Requires installation according to manufacturer instructions and roof substrate requirements
- Compatibility: Must be used with compatible fall protection equipment and an appropriately designed anchorage system
- Safety Requirements: Verify anchorage strength, structural suitability, installation requirements, and applicable fall protection regulations before use
- Attachment Type: Bolt-and-clamp
- Weight Capacity: 310 lb (141 kg), one person
- Product Weight: Approximately 2 lb (0.9 kg)
- Anchor Material: Zinc-plated steel, with stainless steel D-ring components
- Roof Compatibility: Wood-framed roof structures with members up to 2 x 8 inches
- Included Components: Roof anchor, flashing, and weather-tight cap
- Fall Protection Connection: Integral D-ring tie-off point
- Horizontal Lifeline Compatibility: Not compliant for use with horizontal lifelines
- Applicable OSHA Standards: OSHA 1910.140 and OSHA 1926.502, as identified in 3M product information
Ideal Industries:
- Construction and building contractors
- Commercial roofing and residential roofing
- Industrial facility maintenance
- Property management and building operations
- Commercial real estate maintenance
- HVAC installation and service
- Solar energy installation and maintenance
- General industrial operationsMining and oil and gas operations where compatible roof structures and applications are present
- Facilities engineering and maintenance
Ideal Applications:
- Permanent rooftop fall protection anchorage
- Residential roof construction and maintenance
- Commercial roofing installation and repairs
- Roof inspections and scheduled maintenance
- Gutter, flashing, and roof drainage repairs
- HVAC equipment inspection and rooftop servicing
- Solar panel installation and maintenance on compatible roof structures
- Building envelope inspection and repair
- Roofing contractor fall arrest system setup
- Work-at-height safety planning for recurring rooftop tasks
The 3M DBI-SALA 2103670 Permanent Roof Anchor with Flashing and Cap is a dependable anchorage solution for establishing a permanent tie-off point for compatible personal fall arrest equipment on suitable wood-framed roofs. Designed for residential and commercial roofing applications, this permanent roof safety anchor features a bolt-and-clamp attachment system, an integrated stainless steel D-ring, and included flashing and a weather-tight cap. The flashing helps protect the roof penetration against water intrusion when properly installed, while the cap covers the D-ring when it is not in use. With a listed capacity of 310 lb (141 kg) for one person, this compact roof anchor is designed for use as part of a properly selected and installed fall protection system. Which roofs can accommodate the 3M DBI-SALA 2103670? The manufacturer identifies compatibility with wood-framed roof structures using members up to 2 x 8 inches, making it a practical option for suitable residential and commercial buildings. Typical applications include roof inspections, roofing repairs, building maintenance, gutter servicing, and other recurring work at height where an approved anchorage point is required. Is the 2103670 compatible with every fall protection system? No. It is compatible with various fall arrest systems, but it is not compliant for use with horizontal lifelines. Always verify compatibility with the specific self-retracting lifeline, lanyard, harness, and other components selected for the complete system. What should buyers know about installation and safety? This permanent roof anchorage must be installed according to the manufacturer's instructions, with the supporting structure, fasteners, and anchorage arrangement evaluated for the intended application. Its 310 lb capacity should not be confused with the required structural strength of a fall arrest anchorage; the complete system must meet applicable regulatory and engineering requirements. The product is identified by 3M as meeting applicable requirements under OSHA 1910.140 and OSHA 1926.502, but users must confirm the relevant requirements for their specific worksite. For construction companies, roofing professionals, and facility maintenance teams seeking a long-term rooftop fall protection solution, the 3M DBI-SALA permanent roof anchor combines a dedicated tie-off point with integrated weather-protection components in one compact assembly. Enviro Safety Products is an experienced and trusted supplier of certified personal protective equipment (PPE), helping workplace safety professionals source fall protection equipment for demanding industrial and construction environments. Choose the 3M DBI-SALA 2103670 Permanent Roof Anchor with Flashing and Cap when your roof structure, installation requirements, and fall protection system are compatible with this model.
Product Reviews and Q&A
TOP BRANDS
Shop the most trusted safety brands at Enviro Safety.
PRODUCT SPECIALISTS
Got a question? Call and ask one of our trained Product Specialists.
FAST EASY SAVINGS
Get what you need. Save time and money. Let's do this!
CUSTOMER SERVICE
Yes, we answer the phone and reply to email. We're here for you!
CORPORATE ACCOUNTS
Setup an online account. Apply for credit. And more.
Complementary Products
Related Products
Recently Viewed
- Opens in a new window.

