3M™ Particulate Filter 5N11, N95 (Box of 10)

3M Particulate Filter 5N11, N95 Respiratory Protection
NIOSH approved for environments containing certain non-oil based particles. Fits 3M 6000 Series Cartridges. Can be used with all 3M Full or Half Facepiece Respirators. Requires 3M Filter Retainer 501.

When properly fitted, use with appropriate cartridges for various applications including spray painting, petrochemical and chemical manufacturing, and pesticide spraying for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces.

Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Do not use for aerosols containing oil or in environments that are immediately dangerous to life or health (IDLH).
10 per box.

• NIOSH approved for environments containing certain non-oil-based particles
• Use on top of 3M gas and vapor cartridges with 3M 501 Retainer when particles are also present
• Use on top of 3M 603 Filter Holder and 3M 501 Retainer to reduce particulate exposure
• Replaceable particle filter for cost savings
• Wide range of applications reduces inventory needs and training requirements

Details:

COMPATIBLE 3M HALF AND FULL FACEPIECE RESPIRATORS 6000, 7000 AND FF-400 SERIES
Call our customer service for alternative respirators
(click part number for details)

COMPATIBLE 3M PARTICULATE FILTERS AND GAS/VAPOR CARTRIDGES
(click part number for details)